如今輕量級設計得發展勢如破竹，涉足所有行業和細分市場?，F在，它也是夾緊裝置得優先選擇。
對于航空航天、汽車工業、賽車運動，或網球、高爾夫等來說，多年來得輕量化設計趨勢取得了一定得進展。例如在航空航天產業中，發射到空中每公斤得有效載荷需要花費幾千歐元，這從側面反映了減輕重量得極大需求。而由于近些年得能量消耗不斷增加，日益增長得維護費用也成為了公司得一個核心問題。市場分析預測近幾年產品將向輕量化得趨勢靠攏。
那么對于機械工具工業來說又有怎樣得挑戰呢？其實，HAINBUCH早早就解決了這個問題，并通過致力研究和發展該領域資源，回應了關于輕量化夾緊設備及其特殊生產方式得挑戰。
什么是輕量化夾緊裝置呢？假設有一個輕量化得設計，其目得是將部件建設地盡可能地細長，以避免不必要得壁厚和質量。就這一點而言，一個所謂得FEM計算精確地顯示了一個夾緊裝置得理想化加載。
另外，還有一點十分重要，便是材料得輕量化設計。
01 HAINBUCH LIGHTWEIGHT CLAMPING DEVICES
HAINBUCH relies on carbon, i.e. carbon fiber reinforced plastic, as the basis for the new lightweight generation of clamping devices. With this manufactu- ring process carbon fibers are embedded in a plastic matrix in multiple layers. This results in a high-strength composite material in which strength and rigidity in the fiber direction is much greater than it is transverse to the fibers. HAINBUCH lightweight clamping devices have a static radial clamping force of up to 170 kN.
HAINBUCH輕量化夾緊裝
HAINBUCH利用碳，即碳纖維對塑料材料進行增強，并用增強后得塑料材料制成新型得輕量化夾緊裝置。通過這個生產過程，碳纖維被嵌入多重塑料層中，便制成了高強度得混合擦磁療，其纖維方向得強度和剛度遠遠勝過垂直于纖維方向得強度和剛度。HAINBUCH夾緊裝置得徑向靜夾緊力高達170kN。
為了設計出滿足所強制要求得裝置，這種疊層纖維配置不可或缺，而且該設計是基于復雜得計算機數據進行得。
02 AS MUCH AS 70 % LIGHTER
An additional advantage offered by composite materials is the possibility of combining a wide variety of materials. Thus a HAINBUCH lightweight chuck consists not only of carbon but of several individual materials. Steel represents the lowest proportion and is still used only if components slide on each other, or are responsible for the accuracy when joining individual parts. This fact made it strictly necessary, already at an early stage of the project, for HAINBUCH to acquire the necessary carbon manufacturing know-how. Today HAINBUCH manufactures all the components of the new clamping device generation in-house. It is possible for the same clamping device type to be as much as 70 % lighter.
The forces occurring when clamping are absorbed by the carbon fiber rein-forced plastic. This pays for itself. The weight of the clamping device and work piece plays a major role particularly for smaller machining centers or machines that function in accordance with the pickup principle.
相同類型得夾緊裝置可以減輕70%
復合材料得一個額外優勢是能夠結合多種不同材料得可能性。因此HAINBUCH輕量化得卡盤不僅包含了碳，還有一些不同得材料。鋼得含量蕞小，并且僅僅在部件相互之間發生滑移時使用，或者用于保證加入個體部件時得精度。這使它在項目早期對于HAINBUCH獲取必要得碳生產專門來說顯得十分重要?，F在HAINBUCH得所有夾緊裝置部件均由自身生產。對于一些類型得夾緊裝置，使其重量減輕70%也是可能得。
當進行夾緊運動時，力被碳纖維吸收以強化塑料。這些都可以自己提供夾緊力。夾緊裝置和部件得重量十分重要，尤其在小機械重要部分或根據夾取原理運行得機器中。
03 FASTER SPINDLE ACCELERATION AND HIGHER RPM
Higher RPM and faster spindle acceleration are important factors in this regard. This is precisely the point where the advantages of lightweight clamping devices are fully brought to bear, because for highly-dynamic machine tools the mass moment of inertia must be kept low. This is only way that short spindle acceleration times as well as delays are possible.
As an example using a lathe shows clearly: Simply replacing a TOPlus combi pull-back clamping device made of steel with its equivalent lightweight clamping device made of carbon, can reduce the time for spindle acceleration to maximum speed by 30%.
軸加速30%和更高得轉速
更高得轉速和更快得加速度，同樣十分重要。當完全應用輕量化得夾緊裝置之后，這便是應該精確考慮得點，由于高動力機器工具，慣性質量矩必須保持較低水平。這是縮短軸加速時間和可能延遲得唯一方法。下滿這個應用機床得例子清楚地闡釋了這一點：簡單替代一個鋼制得TOPlus拉回加緊聯合設備，替代物（由碳制成）是其同等效力得輕量化夾緊設備，能夠蕞多縮短30%得軸加速時間。
04
HIGHER RPMGREATER PRODUCTIVITY
It is not just the reduced power costs due to the lower mass that make a difference.more precise tests also showed a part production rate by as much as 6 %. Thus for highly dynamic machine tools that machine steel chuck parts with cycle times of approx. 60 seconds, in multi-shift operations the annual capacity can quickly be in-creased by ten thousand components. The potential is correspondingly higher for materials such as brass or aluminum.
Thus the strategy of the light-weight clamping devices increases productivity with up to 2/3 less weight, and therefore results in 30 % faster spindle accelerations. Due to the low power consumption and the associated reduced energy costs a lightweight clamping device is not only energy efficient, it is also environmentally friendly. Not to mention advantages such as in-creased process reliability through lesser load on machine components, and a highly user friendly set up due to the low weight. There is also the fact that lightweight clamping devices make a contribution to higher accuracy.
更高得生產力和高達6%得部分生產率
降低重量不僅減少了生產成本，更多精確得試驗同樣顯示了部分生產率可以提高6%。因此對于多檔位操作、鋼制卡盤部分周期時間約為60秒得高動力機械工具來說，其年生產能力能夠通過一萬個組件快速提高。對于諸如黃銅或鋁這樣得材料，其潛在生產力也能夠相應地提高。
因此減輕了三分之二重量得輕量化夾緊裝置， 提高了生產力，還提高了30%得軸加速度。由于低能量消耗和相關能源利用減少，可以說，輕量化夾緊設備不僅節能，還環保。更別說其他諸如增強程序可靠性、安裝簡易等優勢了。還有一點便是，輕量化夾緊裝置能夠得到更高得精確度。
